RF Signal Detector with Analog/Digital Switch and LED Indicator
RF detectors are simply a radio frequency receiving device. It is designed to detect wireless signals that are being transmitted within a certain frequency range.
For example a wireless hidden camera is designed to transmit video to a video receiver. Some wireless transmitters are designed to transmit as far as 3 miles away while others can only be received one room away. So the stronger the signal being transmitted the easier it is for the bug detector to detect it. Some micro spy cams are designed to output a very low signal making them very hard to detect. You may need to be very close to the camera or bug to detect it. They are designed this way not to be easily detected. The problem is if the detector is too sensitive it gives a false alarm. If it is not sensitive enough it does not detect the signal well enough.
This is what separates this bug detector from some of the others you see. It has a built in sensitivity adjustment allowing you to detect those not so easy to detect wireless bug transmitters. While some spy cameras are very difficult to detect, you can sweep the suspect area with this unit and then gradually increase the sensitivity until you eventually home in on the target. It has a silent vibrate mode as well so you can use it without it sounding an audible alarm so you can operate in complete secrecy. It also has an earphone jack so if you choose you can use the included earphones while making your sweep. This particular model features an analog/digital detection switching, expanding your scanning abilities beyond just RF to allow it to detect Bluetooth devices and even cell phones. Use this device to secure your Home, Office, Hotel Room or any other Public place you demand privacy. Locate Hidden Cameras and Audio Bugs. Use it to find Wi-Fi Hot Spots. Use it to identify LIVE Cell Phones that may be transmitting Private Conversations. Use it to see wireless signals that are otherwise invisible!
Detects all peeping cameras and concealed microphones
Hunts all cellular phones and wireless phones
Features an analog/digital scanning switch
Can detect Bluetooth, WiFi, cellular phone and digital spread spectrum wireless products
LED indications: level 1 (weak), level 2 (medium) and level 3 (strong)
Vibration setting for silent operation
Sensitivity tuner for distance adjustment
Earphones for audible yet discreet detection
Size (L x W x H): 87 x 55 x 24mm
Weight: about 70g (without batteries)
Detecting range: 50MHz to 6.0GHz
Power: 2x AAA Battery
Battery life: Up to 4 hours continuous use
1 Instruction sheet
2 AAA Batteries
1 Set of earbuds
1 Chain clip